Tips for Making a Soccer Pennant From the Comfort of Your Home

It’s tons of fun to make your own football pennants. However, you can enjoy making one yourself only if you know how to go about it. In this guide, we are going to teach you how to make one step by step. Therefore, let’s get to the point and check out the entire process. Read on to find out more.

Get a Ready-Made Pennant

First of all, you should take inspiration from an actual pennant to get started. It’s even better if you get some pennant felt too. Your next move is to do the number cutting. Make sure one number is a little bit smaller compared to the previous number so you can create a layered look.

The purpose of doing so is to make sure that are pennant will have the right sized numbers. In fact, if the shape is right, consider that the job is almost done. The next stage involves stitching the pennant.

Stitching

It’s better to stitch the upper side and then right and left side of the rectangle to the left side for creating a rod pocket, which you can use for the dowel.

You can get dowel rods inexpensively. Typically, the price of one piece is below one dollar. If you don’t have a big budget, this is good news for you. Don’t forget to buy multiple pieces of dowel as you may end up ruining some during the DIY project.

For cutting the pieces, using a branch trimmer or other tools is a good idea. If you are making one for your lovely child, the length should be shorter. The reason is that short pennants are easy to use for kids as they are lightweight and easy to carry.

The dowel should be fixed in the pocket in a way that it should not go out of control the first time it is used. For this purpose, it’s important that you create marks on the endpoints using a special marker like a sharpie marker.

Use Duct Tape

Next, you should use a 6-inch long piece of duct tape and cut it into two pieces. Now, you should wrap the tape around the marked points, and wrap the other piece of duct tape around it.

The role of the outer strips is to create the stopping force for the strip. Therefore, the strip won’t slide up or down. The internal strip is there to offer the best grip for holding the rod pocket. Therefore, it will help you handle the pennant better. And this is quite important.

Also, make sure that the grip is not too tight or you may find it really had to remove the dowel after the season is over. One pennant can be used for more than one season. So, you won’t have to make one again down the road.

In short, if you want to make a soccer pennant from the comfort of your home, we suggest that you follow this guide. The steps explained in this article will make it easier for you to get the job done.

DIY Guide: Make Your Own Soccer Pennant Banner

If you are looking for a DIY method to make a custom football pennant, you are on the right page. Ideally, the whole process will be easier if you use a real pennant as a guide. This will make it more convenient for you to get the measurements. So, let’s get started and go through the practical aspect of the project.

As said earlier, make sure you get a real product for assistance. For instance, you can purchase one yard of felt as well. Next, you can free-hand the number cutting. Ideally, you can cut one number a bit smaller than the previous number for a layered look. Actually, the idea is to ensure the numbers are of the right size for the pennant. If you can get the shape right, you can get the job done in the first stage. Next, stitching should be done.

Also, make sure you sew the top and sides of a tall rectangle to the pennant’s left side, which will make a rod pocket. This rod pocket will be used for the dowel.

The dowel rods are not expensive. You can get each piece for less than a dollar. So, the cost won’t be a problem if you are worried about your budget. It’s better to get a few extra dowel rods in case you make a mistake during the process. You can use the spare dowel rods in this situation.

You can use a tool like a branch trimmer to cut them into two pieces. The one on the extreme right side is for your private use. If you are making it for your daughter, make sure to keep the length short. One benefit of shorter dowels is that your daughter can keep better control over it.

You need to make sure the dowel is secured in the pocket, which is necessary to prevent the dowel from flying towards the stands of visitors the first time it’s waved. Make sure you mark the ending points of the rod pocket. You can use a sharpie marker or finger hold.

Your next step is to get a piece of duct tape (it should be 6″ inches long). Once you have it, you should cut it in half. This will give you two small pieces. Beginning a bit above the marked point, you should wrap the tape around. Next, you should add the other piece over it.

Here it’s important to note that the outer strips tend to work as a stopper. Therefore, the strip that faces out won’t slide down or up. On the other hand, the inner strip offers just the right amount of grip to the rod pocket. This way you won’t lose your pennant. Moreover, the grip shouldn’t be so strong that removing the dowel becomes impossible at the end of the season. After all, you need to use the same pennant next year as well.

So, this is the entire DIY procedure to make your own soccer pennant. The making will be easier if you follow the guidelines given in this article.